Product Overview
* IMPORTANT NOTE: ** Must tap block to 10mm x 1.25 thread. O.E. is 9mm. Torque to 60 ft.lbs. ALSO NOTE: THE SHORTER STUDS NEED TO BE INSTALLED UPSIDE DOWN! (broached end goes into the block) WITH THE 1.25 THREAD GOING INTO THE BLOCK AND WILL TAKE THE 10mm X 1.5 NUTS. The bolt holes on your head gasket may also need to be enlarged.. ***
* IMPORTANT NOTE: ** Must tap block to 10mm x 1.25 thread. O.E. is 9mm. Torque to 60 ft.lbs. ALSO NOTE: THE SHORTER STUDS NEED TO BE INSTALLED UPSIDE DOWN! (broached end goes into the block) WITH THE 1.25 THREAD GOING INTO THE BLOCK AND WILL TAKE THE 10mm X 1.5 NUTS. The bolt holes on your head gasket may also need to be enlarged.. ***
